Filter By Categories
Filter By Tags
Filter By Rating
-
Solid Oak panel with a clear finish. Key-holed on back for both vertical and horizontal wall mounting. Dimensions 10" x 20". -
Rooftop wind speed sensor for Sirocco built prior to 12/1/2001 -
Replacement wind speed sensor for Maximum Wind Speed Alarm (not used with MAC3)
-
Rooftop wind speed sensor for analog instruments (Maestro/Vigilant/Sirocco 2002 or later)
-
Wind speed and direction cable for use with digital instruments (Merlin). Length:60'; 22awg -
Includes 18' of stainless steel strap for chimney and brackets to provide clearance for an overhanging chimney cap, or other obstruction up to 4". -
The Maximum Water Temperature Sensor weather instrument utilizes a precision thermistor that has been potted in a solid bronze rod, bored to accept the thermistor in its very end, along with potted wiring. The bronze rod measures 0.38" O.D. x 3.00" L. The precision thermistor is a solid state device which changes its resistance inversely proportional with temperature from 150,000 Ohms at the low end to 1,500 Ohms at the high end. Interchangeability of thermistors is /-0.2ºC; time constant 10 seconds. Ships complete with 60' of 22 AWG, 2-wire, UV protected cable -
Self emptying rain collector bucket includes 60' of 2 conductor cable (Rainwatch) -
Outside humidity sensor housed in a sintered bronze enclosure with 150' cable. -
Triple coated galvanized steel masts arrive as 58" long, 1.25" O.D. sections that join together to make a single 9'6" mast. These masts are suitable for use with all Maximum wind instruments. -
For use with Maestro, Maestro 2S, Mini-Max, Stratus, Criterion, Merlin, Mystic, Rainwatch, Cronus. Use where only 220/240V power is available. -
The Maximum Air Temperature Sensor weather instrument contains a precision thermistor that has been potted in a nickel-plated, brass probe. The brass probe measures 1/2" O.D. x 1.00" L, and protrudes through the bottom of a PVC cylinder that is 1.31" O.D. x 0.81" H. A secondary 2.25" O.D. white plastic disk provides shade over the probe to diminish the effect of direct sunlight on the thermistor. The precision thermistor is a solid state device which changes its resistance inversely proportional with temperature from 150,000 Ohms at the low end to 1,500 Ohms at the high end. Interchangeability of thermistors is /-0.2ºC; time constant 10 seconds. Ships complete with 60' of 22 AWG, 2-wire, UV protected cable.
