Filter By Categories
Filter By Tags
Filter By Rating
-
Includes a secondary component (track mounted curcuit board) that translates standard #400 anemometer output to industry standard 4-20mA. AC Voltage generating, polycarbonate, 3-Cup anemometer that is calibrated to a master to be interchangeable. Utilizing a single coil (approx. 2.02 VAC at 60 cycles), the #400 is a frequency counting sensor that is suitable for applications where voltage output is not important. Swept Diameter: 7.5" Diameter Housing: 2.0" Overall Height: 3.2" Weight: 3.1 oz For wind energy applications, please visit NRG Systems -
The DIC-3 hand held anemometer features Maximum's unique folding 3-cup design. Cups collapse for easy storage, and the instrument comes with a custom carrying case. To determine wind speed simply open the folded cups and hold the instrument in a wind current. Unlike fan type hand held anemometers that must be aimed precisely into the wind, our wind tunnel tested accuracy is not affected by its position. Wind direction is variable and this instrument records accurately from any direction. DIC-3 has four selectable scales: MPH, Knots, km/h or m/s, to be shown on the 2-digit LCD screen. A single 9V battery (included) powers the LCD for up to 70 hours of continuous use. DIC-3 provides readings up to 155 MPH in one of four modes: instantaneous velocity, highest gust since reset, 2-minute or 5-minute wind speed average. Cup rotor is 5.88" in diameter when extended. -
The BTC hand held anemometer features Maximum's unique folding 3-cup design. Cups collapse for easy storage, and the instrument comes with a custom carrying case. To determine wind speed simply open the folded cups and hold the instrument in a wind current. Unlike fan type hand held anemometers that must be aimed precisely into the wind, our wind tunnel tested accuracy is not affected by its position. Wind direction is variable and this instrument records accurately from any direction. BTC registers wind speeds from 0-35 MPH or 0-70 MPH (also scaled 0-30 Knots and 0-60 Knots) with its jeweled meter movement. User selects high or low range with a button. Cup rotor is 5.88" in diameter when extended. -
The MAC3 Wind Speed Alarm provides operators with a wealth of features and an unprecedented level of control. It is highly accurate, rugged and an ideal solution for managing commercial equipment by collecting and monitoring conditions and providing timely alerts to keep you abreast of wind speeds that could cause safety concerns for people and equipment in nearly endless applications. Incorporating Maximum's renowned #400 anemometer, the MAC3 can be configured for simultaneous use with dual sensors to monitor two separate locations. The MAC3 integrates time delay and latching capabilities to prevent equipment damage due to frequent on/off power cycling, and has a large, easy-to-read green on black LCD panel for viewing wind speed conditions, settings and user-defined information such as wind speed averages, peak gusts and other key metrics. The instrument can be password protected to prevent unintended changes to settings, and the two 5 amp relays can provide on/off control for external devices such as outdoor venue equipment, agriculture devices, municipal fountains, construction equipment and lifts, cranes, security systems, awnings and gate controllers, outdoor advertising and an incredibly wide variety of other devices that can be affected or become unsafe in windy conditions. The Maximum MAC3 controller and anemometer are weather-tight to the IP65 standard and rated for use from -40 to 158 degrees F (-40 to 70 degrees C). Operating in 12- and 24-Volt DC power source environments, the controller measures 5.08 inches wide x 7.39 inches high x 2.26 inches deep (129.0 mm x 187.8 mm x 57.4 mm). MAC3 is shipped complete with one (1) #400 wind speed sensor, 100' sensor cable, 14" straight, stainless steel stub-mast and mast mounting hardware. -
Predictor is a versatile, accurate meteorological grade barometer capable of tracking air pressure changes in a functional and informative presentation. It is a must have for any home weather enthusiast. Dial shows traditional barometer nomenclature (displays "Rain", "Change" and "Fair"), as well as measurements over a 3-inch scale of mercury (28.5" - 31.5"). Accurate to ±0.16 inches of mercury. Can be adjusted to any elevation up to 6500'. Precision German movement is displayed behind a cutaway dial. Re-settable pointer lets you track changes in barometric pressure. https://youtu.be/TB1iX_E_xa4 -
A simple display of wind speed, Sirocco is a self-powered wind speed instrument registers speed up to 100 MPH that is housed in a solid wood block. Its versatility allows you to mount it on a wall or simply sit it on a shelf. Sirocco is powered by the rooftop wind speed sensor and requires no external power source. -
A self-powered wind speed instrument that displays speed up to 45 m/s. Mounted in a mahogany-finished, hardwood block and factory calibrated for accuracy. Can be wall mounted or set on any horizontal surface. Requires no external power supply. -
Wind direction sensor for analog instruments (Maestro/Maestro 2S) -
Solid Oak panel with a clear finish. Key-holed on back for horizontal wall mounting. Dimensions: 18" x 26". -
Solid wood, Mahogany finished panel. Key-holed on back for horizontal wall mounting. Dimensions: 18" x 26". -
Solid Oak panel with a clear finish. Key-holed on back for horizontal wall mounting. Dimensions: 18" x 26". -
Solid wood, Mahogany finished panel. Key-holed on back for horizontal wall mounting. Dimensions: 18" x 26".
