Filter By Categories
Filter By Tags
Filter By Rating
-
60' cable used with any analog instrument and all temperature and rainfall instruments. Specs: Length:60'; 22awg What's in the Box: 60ft. 2 wire wins speed cable -
The 4" wall brackets mounting assembly will handle obstructions up to 4 inches that may be in the way of the sensor mast (such as roof overhang). -
For use with Maestro, Maestro 2S, Mini-Max, Stratus, Criterion, Merlin, Mystic, Rainwatch, Cronus. Use where only 220/240V power is available. -
Switch replacement for all rain collectors -
The 8" wall brackets mounting assembly will handle obstructions up to 8 inches that may be in the way of the sensor mast (such as roof overhang). -
Humidity instrument sensor cable -
For use with MAC3 Wind Speed and Controller -
Replacement cup assembly for handheld wind speed instruments -
The 18" wall brackets mounting assembly will handle obstructions up to 18" that may be in the way of the sensor mast (roof overhang). Includes third leg on bottom bracket for added support.
-
Solid wood, Mahogany finished panel. Key-holed on back for wall mounting. Dimensions 8" x 8". -
Solid Oak panel with a clear finish. Pre-drilled for instrument installation, and key-holed on back for wall hanging. Dimensions: 8" x 8". -
Lower brackets adjusts from 45" to 60" to accomodate most any roof pitch. -
Shielded cable for use with Wind Alarm. Specs: Length:60'; 22awg -
Includes 18' of stainless steel strap for chimney and brackets to provide clearance for an overhanging chimney cap, or other obstruction up to 4". -
60' wind direction cable for analog instruments (Maestro/Maestro 2S) Specs: Length:60'; 22awg
-
For use with Nor'easter, Maestro, Maestro 2S, Sirocco and Vigilant.
-
Wind speed and direction cable for use with digital instruments (Merlin). Length:60'; 22awg
-
Mahogany finished, solid wood mount pre-drilled to accept any single brass instrument. Dimensions: 8 1/2" high x 10" wide. -
Solid Oak mount with a clear finish, pre-drilled to accept any single brass instrument. Dimensions: 8 1/2" high x 10" wide. -
Solid wood, Mahogany finished panel. Key-holed on back for both vertical and horizontal wall mounting. Dimensions 10" x 20" -
Solid Oak panel with a clear finish. Key-holed on back for both vertical and horizontal wall mounting. Dimensions 10" x 20". -
Mast mounted rain collector platform for use with Maximum Rainwatch wired or Wi-Fi instrument. -
Shielded cable for use with Wind Alarm.
-
The Maximum Air Temperature Sensor weather instrument contains a precision thermistor that has been potted in a nickel-plated, brass probe. The brass probe measures 1/2" O.D. x 1.00" L, and protrudes through the bottom of a PVC cylinder that is 1.31" O.D. x 0.81" H. A secondary 2.25" O.D. white plastic disk provides shade over the probe to diminish the effect of direct sunlight on the thermistor. The precision thermistor is a solid state device which changes its resistance inversely proportional with temperature from 150,000 Ohms at the low end to 1,500 Ohms at the high end. Interchangeability of thermistors is /-0.2ºC; time constant 10 seconds. Ships complete with 60' of 22 AWG, 2-wire, UV protected cable. -
Solid wood, Mahogany finished panel. Key-holed on back for both vertical and horizontal wall mounting. Dimensions 11" x 26" -
Solid Oak panel with a clear finish. Key-holed on back for both vertical and horizontal wall mounting. Dimensions 11" x 26". -
The Maximum Water Temperature Sensor weather instrument utilizes a precision thermistor that has been potted in a solid bronze rod, bored to accept the thermistor in its very end, along with potted wiring. The bronze rod measures 0.38" O.D. x 3.00" L. The precision thermistor is a solid state device which changes its resistance inversely proportional with temperature from 150,000 Ohms at the low end to 1,500 Ohms at the high end. Interchangeability of thermistors is /-0.2ºC; time constant 10 seconds. Ships complete with 60' of 22 AWG, 2-wire, UV protected cable -
Solid wood, Mahogany finished panel. Key-holed on back for wall mounting. Dimensions: 18" x 20". -
Solid Oak panel with a clear finish. Key-holed on back for horizontal or vertical wall mounting. Dimensions: 11" x 34.5". -
Solid wood, Mahogany finished panel. Key-holed on back for wall mounting. Dimensions: 11" x 35". -
Solid Oak panel with a clear finish. Key-holed on back for horizontal or vertical wall mounting. Dimensions: 11" x 35". -
Triple coated galvanized steel masts arrive as 58" long, 1.25" O.D. sections that join together to make a single 9'6" mast. These masts are suitable for use with all Maximum wind instruments. -
The Maximum Water Temperature Sensor weather instrument utilizes a precision thermistor that has been potted in a solid bronze rod, bored to accept the thermistor in its very end, along with potted wiring. The bronze rod measures 0.38" O.D. x 3.00" L. The precision thermistor is a solid state device which changes its resistance inversely proportional with temperature from 150,000 Ohms at the low end to 1,500 Ohms at the high end. Interchangeability of thermistors is /-0.2ºC; time constant 10 seconds. Ships complete with 60' of 22 AWG, 2-wire, UV protected cable
-
Solid wood, Mahogany finished panel. Key-holed on back for horizontal wall mounting. Dimensions: 18" x 26". -
Solid Oak panel with a clear finish. Key-holed on back for horizontal wall mounting. Dimensions: 18" x 26".
